Items List

Clear

Recent RFI Items

  • B1 - Foundation - shower rebate

    Please clarify how reinforcement details in the shower rebate detail will comply with your nominated means of compliance for NZBC Clause B1.

    Created 8 months ago

  • B1 - Lintel fixing

    Please provide the lintel fixing information to show compliance with NZBC Clause B1.

    Created 8 months ago

  • E2 - Head flashing

    Please specify on the drawing that sealant must be installed between the head flashing and window flange in VH and EH wind zones.

    Created 8 months ago

  • B1 - Roofing

    Please clarify the fixing pattern for roof cladding to show compliance with NZBC Clause B1.

    Created 8 months ago

  • E1 - Outfall

    The PIM report indicates that stormwater infrastructure is not available for this site. Please provide further information to demonstrate that surface water will be discharged to a suitable outfall on-site, e.g. soak pit.

    Created 8 months ago

  • General - Ground condition

    Council’s knowledge based on what has been discovered on sites in the locality suggests that this site may have suspect bearing capability. Please provide a Geotech report. Please note that the foundation is not able to be assessed until the Geotech report is received.

    Created 8 months ago

  • E1 - Paved patio

    Please demonstrate how surface water from the paved surface will be discharged in a way that protects other property from the adverse efects of surface water to show compliance with NZBC Clause E1.3.1

    Created 8 months ago

  • H1 - Ceiling Insulation

    When full-thickness insulation cannot be installed due to roof space restrictions, the roof R-Value could be reduced to R3.3 for a distance up to 500mm from the outer edge of the ceiling perimeter. You proposed design does not clearly demonstrate the compliance with the schedule method for ceiling perimeters. Please provide further information to show compliance with NZBC Clause H1.

    Created 8 months ago

  • D1 - Landing

    Please indicate the maximum height from the sliding doors to the ground/ landing to show compliance with NZBC Clause D1.3.3.

    Created 8 months ago

5